AllGood Sci & Tech Co., Ltd.
- An AllGood-Group Company
- An AllGood-Group Company
AG-DK-BG10 Optimized Lightning Rod
AG-DK-BG10 Optimized Lightning Rod is designed according to IEC Standard High Voltage Testing Technology First Part: General Definition and Testing Requirement and GB 50057-2010 Design Specification of Building Lightning Protection. This lightning rod adopts fine quality stainless steel material, takes the advantages of rust and corrosion resistance, appealing design, simple construction, safety and reliability, sturdy construction. It is suitable for direct lightning protection of all kinds of buildings.
| Item No. : | AG-DK-BG10 |
| Discharge Current Capacity : | 200kA (10/350μs) |
| Amplitude Attenuation Rate : | ≥82% |
| Brupt Slope Damping Ratio : | ≥35% |
| Response Time : | 60μs |
| Limiting Current Resistance Value : | ≤3Ω |
| Grounding Resistance : | ≤10Ω |
| Wind Resistance : | ≤40m/s |
| Height : | 1.8m |
| Weight : | 4KG |
| Down Conductor : | Steel plate or steel rod which diameter is more than 8mm |
- Conduct the direct lightning stroke.
- Safe and reliable, no radioactive elements, corrosion resistance and good impact resistance.
- No power supply nor energy dissipation device required.
- Attractive appearance, stainless steel material, can be set under the severe environment.
Regular inspection (Every half year or once a year) the following issues are required:
- Weather the screw bolts and welds of joints are well fixed?
- Weather the earthing conductor is connected effectively with the earth-termination system?
- if the screw bolts and welds are badly rusty, please change the screw bolts and re-weld the joints.